Change the dial to run and let the system turn on automatically. When you have checked the first station, you can manually shut the system off, or just let the time run out. Switch the dial back to āManual One Stationā, use the arrow buttons to select the next station, and repeat the process until you have inspected all stations.
NoTE: One start time will activate all stations sequentially in that program. this eliminates the need to enter each stationās start time. Multiple start times in a program can be used for separate morning, afternoon, or evening watering cycles. start times may be entered in any order. the X-Core will automatically sort them. sprinkler timer to open only one zone. Then open the manual drainage valve at the end of this area (when equipped). Web3 X-COREĀ® COMPONENTS LCD Display 1 Run Times Allows user to set each valve station run time from 1 minute to 4 hours 2 Start Times Allows 1 to 4 start times to be set in When the X-Core receives an input from the sensor to disable . watering, the display will indicate those stations that have been . programmed to override the sensor. A station that is running in . the sensor override mode will flash the and icons alternately. Test program of all stations. The X-Core allows the user a simplified method for running a